SENICO Electronics

Component sourcing and inventory guides

AMC1300BDWVR: Complete Sourcing Guide & Price 2026

Source AMC1300BDWVR with a current-sensing error budget, correct shunt interface, isolated power review and documented qualification requirements.

Quick Answer

AMC1300BDWVR is a Texas Instruments isolated amplifier with a plus or minus 250-mV input range and fixed gain of 8.2, intended for signals such as shunt-resistor current measurements. The B grade and the complete DWVR suffix matter to procurement. Match the requested device to the approved circuit and read the orderable addendum when an individual ordering page is unavailable.

The main sourcing risk is confusing the amplifier's identity with the performance of the current sensor as a whole. The shunt, connections, filtering, isolated supply and downstream converter all affect the result. Start an RFQ with the current range and an approved BOM reference, then separate exact-part offers from any engineering alternatives. This prevents an apparently similar isolation amplifier from changing the measurement scale or introducing an unreviewed accuracy difference.

Key Specifications

TI's data sheet identifies the B version with specified low offset and drift, and an extended industrial temperature range. The package addendum lists AMC1300BDWVR as an eight-pin DWV SOIC orderable supplied on tape and reel. Preserve that exact code in both the purchase line and the receiving checklist.

Avoid designing normal operation at an absolute maximum rating. A transient-survival limit, a recommended operating range and a specified linear response are different constraints. Procurement does not need to reproduce every design calculation, but it should hold a reference to the released calculation and the approved part list. A sourcing exception can then be evaluated against something concrete instead of an informal recollection of why the original part was chosen.

  • Use the specified plus or minus 250-mV linear input range when reviewing the shunt's maximum intended signal.
  • Account for the fixed gain of 8.2 in the ADC input calculation and measurement calibration.
  • Check the B-grade high-side supply range and both power domains against the actual supply design.

Where to Use This Part

Typical evaluation areas include motor-drive current monitoring, frequency inverters and uninterruptible power supplies. These uses involve dynamic signals and potentially rapid changes in common-mode voltage. The measurement chain should be tested at realistic switching conditions, with an appropriate setup and qualified engineering supervision.

Route the shunt sense connections intentionally and document the measurement reference points. A change in board routing or a different shunt footprint can alter the voltage being measured even when the amplifier remains unchanged. Store qualification records with the board revision. When sourcing supports a repair, identify that revision before accepting a replacement assembly, because the same top-level equipment name may conceal several current-sensing implementations.

  • In a motor drive, check sampling timing, filter delay and the influence of switching events on the measured current.
  • In a power converter, review the shunt's power loss and temperature rise alongside the amplifier error budget.
  • In a diagnostic channel, verify how the controller recognises invalid readings during a missing supply or abnormal input condition.

Pricing and Lead Time

An RFQ should identify AMC1300BDWVR, quantity, intended assembly date, destination and packaging needs. Include any approved date-code range and whether multiple lots may be accepted. If the order is for qualification, distinguish sample demand from a later production forecast so the seller does not treat an estimate as a committed purchase.

Request a written offer that states exactly what quantity is proposed and what evidence accompanies it. Manufacturer documentation confirms design characteristics, while lot records and receiving inspection address the offered material. Neither a family product page nor a photographed label alone establishes every procurement requirement.

There is no universal current price or delivery commitment in this guide. Compare dated quotations using the same quantity and delivery basis. Include the time your organisation needs to inspect, characterise and release the parts. If an offer involves repackaged material, ask how identification and handling history will be retained. Resolve those questions before the assembly line expects to consume the components.

Common Alternatives

The most important alternative distinction is input range. A voltage-sensing isolator intended for much larger signals can produce a different effective resolution and error contribution when connected to a small shunt voltage. A device in the same general category should therefore be reviewed as a new measurement choice.

Compare the required gain, offset, drift, bandwidth, propagation delay, supply conditions and output interface. Include the package and insulation requirements of the finished equipment. A switch to an isolated modulator adds converter-filter and digital-processing decisions that should be captured in the design plan rather than hidden in a purchasing note.

For the non-B version within the AMC1300 family, review the explicit comparison table instead of treating the suffix as a packing detail. For any proposed change, repeat the checks most sensitive to that difference: calibration stability for accuracy changes, loop response for timing changes, and fault response for diagnostic changes. Finish with an updated approved-parts record that names the exact accepted orderables and the board revisions covered by the decision.

FAQ

How is the correct shunt value determined?

Engineering selects it from the intended current range, permitted voltage drop, power dissipation and measurement error budget. The amplifier input range is one input to that decision. The finished current channel also needs thermal and dynamic verification.

Why retain the B in AMC1300BDWVR?

TI specifies different performance for AMC1300B and AMC1300. The B identifies an electrical grade, not simply a shipping format. Removing it from a request can lead to a materially different proposal that requires engineering review.

What proves the DWVR ordering code exists?

The manufacturer data sheet package addendum explicitly lists AMC1300BDWVR. Retain the checked document with the sourcing record, and use the current manufacturer ordering information to reconfirm package and carrier details before issuing the purchase order.

Request an RFQ review for AMC1300BDWVR

Sources