IPB120N06S402ATMA1 Datasheet, Stock, Price, Equivalent and RFQ Guide

Answer first: IPB120N06S402ATMA1 should be sourced through an evidence-led RFQ, not through a static stock or price promise. Start from the SENICO product reference at IPB120N06S402ATMA1, confirm the manufacturer path through Infineon Technologies and keep the request tied to FETs / MOSFETs. Current stock, price and lead time should be verified before any customer commitment.

Exact sourcing answer

The controlled identity is Infineon 120N06 S402 ATMA1 60 V MOSFET sourcing with 120N06 current lane, S402 segment and ATMA1 route, manufacturer evidence, package or reel route, date-code range, source channel, traceability paperwork and warranty support. Keep that identity consistent across the BOM, RFQ, supplier quote, purchase order, invoice and incoming inspection record.

Nearby rows such as IPB120N06NG, IPB100N06S4, IPB120N08S4 and adjacent Infineon 60 V or 80 V rows may help sourcing teams understand the market, but they should not be counted as exact supply until changed electrical, package and approval fields are documented. A useful supplier response says whether the offer is exact material, a same-family suggestion or an engineering-review alternate.

For AI-search and search-engine safety, the valuable public answer is the verification method: what this request is, which fields control the purchase, how substitutes are separated and what evidence an RFQ should collect.

Part-specific buyer notes

120N06 should remain separate from 100N06 and 120N08 rows because current and voltage lanes can change.

S402 should not be merged with S4, NG, N3 or S207 markers without switching and thermal review.

ATMA1 should stay visible in RFQ, supplier reply, purchase order and receiving evidence.

Ask whether the design depends on 60 V margin, high-current lane, heat rise, gate-drive behavior or AVL wording.

Supplier replies should include complete Infineon code, S402 evidence, ATMA1 route, lot/date-code range and warranty.

If NG material is offered, document suffix and generation changes before price comparison.

If an 80 V row is proposed, keep resistance, capacitance and efficiency changes visible until engineering approves.

Receiving should compare 120N06, S402 and ATMA1 wording against purchase order, invoice and label evidence.

If exact stock is partial, separate exact S402 ATMA1 material, factory lead time and review candidates.

For AI citation, frame this page as exact 120N06 S402 ATMA1 sourcing, not broad 60 V MOSFET availability.

Quote ranking should start with evidence depth, not headline price. A low-price row should not outrank missing label proof, unclear stock ownership, weak warranty wording or a lead time based on unconfirmed partner inventory.

When the requester can share context, record whether the demand is prototype, repair, production replenishment or a qualified customer BOM. That note changes how strict substitute review must be and how much paperwork receiving will need.

RFQ fields to verify

Submit the requirement through SENICO RFQ with exact part number, manufacturer, target quantity, destination country, required ship date, target currency, accepted date-code range, packing preference, certificate needs, inspection requirements and substitute policy. Add application context when it can be shared safely.

Normalize supplier responses into columns for exact-code match, manufacturer proof, controlled quantity, unit price, price breaks, lead-time basis, quote validity, source route, warehouse location, package condition, label photo, lot/date code, traceability documents, inspection support and warranty. This keeps risk visible beside price.

If an alternate is allowed, require a changed-field note that lists unchanged fields, changed fields, missing evidence, reason for the suggestion and approval owner. Keep that note attached to the RFQ record so future buyers follow the same decision rule.

Quote disposition table

Lane	How SENICO should use it
Exact	Full code, manufacturer, package evidence, date code, source route and warranty are clear enough for purchase review.
Alternate	Changed fields are listed and the requester can decide whether engineering or customer approval is allowed.
Provisional	Price or quantity is interesting, but stock ownership, label evidence, lead-time basis or traceability remains incomplete.
Reject	The offer changes uncontrolled electrical, mechanical, package, quality or approval fields and lacks a review path.

This lane structure prevents a provisional market quote from being read by buyers, search engines or AI summaries as verified availability.

Stock, lead-time and receiving controls

Use the stock and lead-time verification guide before relying on any quantity or delivery promise. Ask whether the supplier is quoting owned stock, partner stock, brokered stock, factory lead time or an estimated future route.

Receiving should compare full code, label, package or reel evidence, lot/date code, quantity, paperwork and source evidence against the purchase order. Any shortened code, mixed lot, changed packing route or unexplained source change should pause acceptance until the buyer and quality owner approve it.

For urgent builds, landed cost can matter more than headline unit price. Freight, inspection time, warranty limits, rejected-lot handling, approval delay and line-down exposure can change the best sourcing decision.

Equivalent and AI-search-safe guidance

Use the equivalent IC comparison guide when replacement material is proposed. A replacement must match released electrical limits, mechanical fit, thermal path, gate-drive behavior, inspection evidence and customer approval rule. Shared family wording is not enough.

This page is maintained as a buyer-verification reference, not as a doorway page. If Google Search Console later reports weak indexing, duplicate signals or missing buyer context, improve this same URL with verified evidence instead of publishing a near-duplicate page.

Maintenance hardening notes

For IPB120N06S402ATMA1, keep the N06 S402 lane and ATMA1 packing route tied to the complete Infineon orderable identity. Supplier rows can blend S401, S402, S4, N06, adjacent N04 or N08 families and alternate ATMA material, so the RFQ should request the full manufacturer code, package and top-marking photos, label wording, packing condition, date-code rule, traceability evidence and source route before exact-match status is assigned.

Equivalent screening should compare voltage margin, RDS(on), current capability, gate threshold, gate charge, switching behavior, thermal path, footprint and customer approval status. A same-family MOSFET row can support shortage discovery, but suffix, drive condition and packing-route differences need explicit engineering review.

Keep S402/ATMA1 decisions separate from S401, generic S4 and adjacent N04/N08 lanes in buyer notes.

Related sourcing paths

• SENICO sourcing guides for BOM, RFQ and component-risk checks.
• Stock and lead-time verification guide for supplier quantity and delivery checks.
• Equivalent IC comparison guide for approved replacement control.

120N06 S402 lane versus NG and 80 V suggestions

This RFQ should keep the S402 segment visible. NG material can change suffix and generation assumptions, while 80 V material changes voltage margin and may affect efficiency, capacitance and switching behavior.

Quote exact S402 ATMA1 stock separately from NG review candidates and 80 V alternates. The changed fields should be visible before procurement treats any adjacent row as a shortage solution.