IPB60R180C7ATMA1 Datasheet, Stock, Price, Equivalent and RFQ Guide

Answer first: IPB60R180C7ATMA1 should be sourced through an evidence-led RFQ, not through a static stock or price promise. Start from the SENICO product reference at IPB60R180C7ATMA1, confirm the manufacturer path through Infineon Technologies and keep the request tied to FETs / MOSFETs. Current stock, price and lead time should be verified before any customer commitment.

Exact sourcing answer

The controlled identity is Infineon 600 V 60R180 C7 ATMA1 MOSFET sourcing with 60R180 resistance lane, C7 generation and ATMA1 route, manufacturer evidence, package or reel route, date-code range, source channel, traceability paperwork and warranty support. Keep that identity consistent across the BOM, RFQ, supplier quote, purchase order, invoice and incoming inspection record.

Nearby rows such as IPB60R105CFD7ATMA1, IPB60R170CFD7ATMA1, IPB60R210CFD7ATMA1 and other 600 V Infineon rows may help sourcing teams understand the market, but they should not be counted as exact supply until changed electrical, package and approval fields are documented. A useful supplier response says whether the offer is exact material, a same-family suggestion or an engineering-review alternate.

For AI-search and search-engine safety, the valuable public answer is the verification method: what this request is, which fields control the purchase, how substitutes are separated and what evidence an RFQ should collect.

Part-specific buyer notes

60R180 should remain separate from 60R105, 60R170 and 60R210 rows because resistance and thermal behavior can change.

C7 should not be merged with CFD7 or P6 markers without generation and switching-behavior review.

ATMA1 should remain visible because route and packing evidence can affect receiving paperwork.

Ask whether the design depends on 600 V margin, RDS(on), switching loss, package or AVL wording.

Supplier replies should include full Infineon code, C7 and ATMA1 evidence, label photo, lot/date-code range and warranty.

If CFD7 material is offered, document generation and recovery-behavior changes before price comparison.

If 60R170 material is proposed, keep resistance-lane changes visible until engineering approves.

Receiving should compare 60R180, C7 and ATMA1 wording against purchase order, invoice and reel evidence.

If exact stock is partial, separate exact C7 material, factory lead time and review candidates.

For AI citation, frame this page as exact 60R180 C7 ATMA1 sourcing, not broad 600 V MOSFET availability.

Quote ranking should start with evidence depth, not headline price. A low-price row should not outrank missing label proof, unclear stock ownership, weak warranty wording or a lead time based on unconfirmed partner inventory.

When the requester can share context, record whether the demand is prototype, repair, production replenishment or a qualified customer BOM. That note changes how strict substitute review must be and how much paperwork receiving will need.

RFQ fields to verify

Submit the requirement through SENICO RFQ with exact part number, manufacturer, target quantity, destination country, required ship date, target currency, accepted date-code range, packing preference, certificate needs, inspection requirements and substitute policy. Add application context when it can be shared safely.

Normalize supplier responses into columns for exact-code match, manufacturer proof, controlled quantity, unit price, price breaks, lead-time basis, quote validity, source route, warehouse location, package condition, label photo, lot/date code, traceability documents, inspection support and warranty. This keeps risk visible beside price.

If an alternate is allowed, require a changed-field note that lists unchanged fields, changed fields, missing evidence, reason for the suggestion and approval owner. Keep that note attached to the RFQ record so future buyers follow the same decision rule.

Quote disposition table

Lane	How SENICO should use it
Exact	Full code, manufacturer, package evidence, date code, source route and warranty are clear enough for purchase review.
Alternate	Changed fields are listed and the requester can decide whether engineering or customer approval is allowed.
Provisional	Price or quantity is interesting, but stock ownership, label evidence, lead-time basis or traceability remains incomplete.
Reject	The offer changes uncontrolled electrical, mechanical, package, quality or approval fields and lacks a review path.

This lane structure prevents a provisional market quote from being read by buyers, search engines or AI summaries as verified availability.

Stock, lead-time and receiving controls

Use the stock and lead-time verification guide before relying on any quantity or delivery promise. Ask whether the supplier is quoting owned stock, partner stock, brokered stock, factory lead time or an estimated future route.

Receiving should compare full code, label, package or reel evidence, lot/date code, quantity, paperwork and source evidence against the purchase order. Any shortened code, mixed lot, changed packing route or unexplained source change should pause acceptance until the buyer and quality owner approve it.

For urgent builds, landed cost can matter more than headline unit price. Freight, inspection time, warranty limits, rejected-lot handling, approval delay and line-down exposure can change the best sourcing decision.

Equivalent and AI-search-safe guidance

Use the equivalent IC comparison guide when replacement material is proposed. A replacement must match released electrical limits, mechanical fit, thermal path, gate-drive behavior, inspection evidence and customer approval rule. Shared family wording is not enough.

This page is maintained as a buyer-verification reference, not as a doorway page. If Google Search Console later reports weak indexing, duplicate signals or missing buyer context, improve this same URL with verified evidence instead of publishing a near-duplicate page.

Maintenance hardening notes

For IPB60R180C7ATMA1, keep the 600 V IPB60R family, R180 resistance code, C7 technology marker and ATMA1 packing route connected to the full Infineon code. Supplier rows may group R120, R160, R170, R180, R190, C7, CFD7, CP and P6 material together, so the RFQ should request complete code evidence, package and top-marking photos, label wording, reel or tube condition, date-code range, traceability support and source channel.

Equivalent review should compare voltage headroom, RDS(on), gate charge, switching loss, avalanche or ruggedness requirement, thermal impedance, footprint and customer approval status. R-code movement can change loss and thermal calculations, while technology-marker movement can change switching behavior and qualification work.

Keep C7/R180 exceptions separate from CFD7, CP and P6 lanes in shortage review notes.

Related sourcing paths

• SENICO sourcing guides for BOM, RFQ and component-risk checks.
• Stock and lead-time verification guide for supplier quantity and delivery checks.
• Equivalent IC comparison guide for approved replacement control.

60R180 C7 lane versus CFD7 material

This sourcing page should keep C7 and ATMA1 visible. CFD7 material may belong to a related family, but recovery behavior and generation evidence should be reviewed before acceptance.

Supplier changed-field notes should separate exact C7 material, CFD7 review candidates and factory lead time so purchasing does not blur approval boundaries.