SENICO Electronics

Component sourcing and inventory guides

ISO224BDWVR: Complete Sourcing Guide & Price 2026

Understand ISO224BDWVR voltage sensing, differential ADC integration, isolation boundaries and the evidence needed for an industrial sourcing request.

Quick Answer

ISO224BDWVR is a precision isolated amplifier intended for voltage measurement, with a bipolar input range of plus or minus 12 V and a differential output range of plus or minus 4 V. It is a candidate for evaluating industrial analog signals that must cross an isolation barrier. Purchase review should preserve the B performance grade and DWV package, because a family-level description does not fully identify the component.

The central design question is the measurement chain. A voltage divider, amplifier, output interface and ADC contribute different errors and operating constraints. Buying an isolated amplifier does not establish the accuracy or safety of the complete instrument. Define the signal range, common-mode environment and required measurement uncertainty before requesting a proposed alternate. This turns the RFQ into a request tied to a real design instead of a search for any device labelled isolated amplifier.

Key Specifications

The B grade has tighter specified DC performance than the A grade. TI lists a maximum input offset of plus or minus 5 mV at 25 degrees Celsius and a maximum gain error of plus or minus 0.3 percent at that temperature. These are component specifications with stated conditions, not the total error of an installed measurement channel.

Ask engineering to document the error budget separately for offset, gain, drift and the external divider. Calibrating one point can correct an observed offset without proving behaviour across the entire input span or temperature range. For purchasing, the useful requirement is a clearly stated approved grade and qualification basis, with acceptable deviations identified before offers are compared.

  • Check the high-side supply range of 4.5 V to 18 V and low-side supply range of 4.5 V to 5.5 V.
  • Verify the differential output range and output common-mode level against the following ADC or signal-conditioning stage.
  • Match the eight-pin DWV outline, pin functions and assembly requirements to the approved design files.

Where to Use This Part

Evaluate this part in industrial voltage acquisition, inverter monitoring or instrumentation where a controlled analog signal needs galvanic separation. The input range can accommodate common bipolar industrial signals, but any larger external voltage needs an appropriate front end designed for its electrical and environmental conditions.

A generic component should not be described as medical grade simply because it appears in a medical instrument concept. Patient protection, applicable insulation requirements and the consequences of a failed measurement belong to the end-product assessment. The sourcing file should identify whether a component is used in patient-connected circuitry, an auxiliary supply monitor or a laboratory subsystem. Those distinctions affect the evidence engineering needs and cannot be resolved from the ordering code alone.

  • In a voltage-monitoring channel, review the divider's tolerance, working voltage, dissipation and fault behaviour alongside the amplifier.
  • In a multichannel instrument, consider channel calibration, reference stability and interference between adjacent measurements.
  • In equipment developed for a medical environment, require the device manufacturer to qualify the complete board and system for its intended use.

Pricing and Lead Time

Prepare an RFQ around ISO224BDWVR, the quantity required and the release date for the actual assembly. State whether the organisation has already qualified this exact component or is buying samples for evaluation. That distinction helps avoid treating an engineering trial as approval for volume production.

Ask for proposed carrier, lot identification, date-code information and supporting records. The manufacturer order page identifies package and handling details, but it does not prove the condition of a seller's particular lot. Receiving should compare the offer, purchase order and delivered labels against the same complete ordering code.

Price and delivery remain quotation-specific. Request a dated commercial offer with its validity and delivery assumptions. When comparing cost, include any required inspection, additional characterisation and engineering work. A cheaper performance grade may create a calibration or redesign burden. Do not assume an alternate can be accepted because it appears to reduce the unit price; quantify what the instrument would need to demonstrate after a change.

Common Alternatives

Common alternative paths include another isolated amplifier grade, a different analog input range, or a measurement architecture that digitises before crossing the barrier. These are engineering options with different tradeoffs. None should be accepted as a general substitute without a controlled review.

For a grade change, compare guaranteed offset, gain error, drift and transient immunity under the intended operating conditions. For an input-range change, determine how the external scaling network and noise budget would change. For a digital architecture, account for the converter, reference, isolated interface and software implications. A lower component count in one block can move complexity elsewhere.

Keep the original voltage-sensing requirement visible throughout the comparison. Review startup, missing supplies and saturated inputs as well as normal linear operation. A qualification plan should show how the system detects measurements that cannot be trusted. Purchasing can then request offers against the qualified configuration and preserve any unapproved proposals as separate alternatives, with a named reviewer and a clear release condition.

FAQ

Is ISO224BDWVR intended for low-value current shunts?

Its input range is optimised for voltage sensing. A shunt measurement may benefit from a different input range and error budget. Engineering should calculate the signal amplitude and required resolution before selecting the measurement architecture.

Can the B and A grades be combined in one purchase line?

Keep them distinct unless the design authority has approved both. Their precision specifications differ. Identify the exact grade in the BOM, RFQ and receiving criteria so a commercial substitution does not silently change measurement performance.

Does the isolation rating certify a medical instrument?

No. A component specification supports part of the system design evidence. Suitability for any medical application requires qualification of the complete board and device, including the intended electrical connections and applicable safety requirements.

Request an RFQ review for ISO224BDWVR

Sources