Quick Answer
ISO7721DR is a two-channel digital isolator with one channel in each direction, supplied in an eight-pin narrow-body SOIC. It can be evaluated for a pair of digital signals crossing between separate ground domains. For sourcing, the decisive details are channel direction, output default behaviour and the D package. Do not transfer the isolation figures of a wider package onto this exact orderable.
A typical procurement request begins with a familiar functional description such as isolated serial interface. That description is incomplete: the signals might be a transmit and receive pair, two signals travelling together, or an open-drain bus needing bidirectional behaviour on the same conductor. Establish the circuit function before requesting alternatives. The right evidence is a signal list with direction, voltage and startup requirements, attached to the exact approved manufacturer number.
Key Specifications
The ISO7721 family supports digital signalling up to 100 Mbps and supply operation from 2.25 V to 5.5 V. TI distinguishes the D package from the wider DW and DWV packages: the D variant carries a 3000-VRMS UL 1577 isolation rating. This package-specific distinction matters when reviewing a sourcing proposal.
The device does not generate isolated power. Its two local domains require the power arrangement defined by the system design. Keep a note of which supply can appear first, and what a powered receiver will observe while the other side is absent. These conditions deserve explicit review because the normal operating waveform alone may conceal a startup or shutdown problem.
- Match the one-forward, one-reverse channel arrangement to the direction of each board signal.
- Check that the non-F device's default output state meets the system requirement when input power or signal is lost.
- Verify the eight-pin D footprint and the applicable insulation conditions in the exact package documentation.
Where to Use This Part
Possible evaluation uses include isolating a UART transmit and receive pair, transferring a command and a status signal, or separating control logic from a noisy industrial subsystem. The suitability of each use depends on channel count, logic levels, delay and the end product's isolation requirements.
An isolator is not automatically a complete communication transceiver. Its digital pins are not a direct replacement for a differential cable driver. If the design also needs RS-485, RS-232 or CAN signalling, identify the necessary interface circuitry separately. This prevents procurement from collapsing several different BOM functions into one broad isolation category and accepting an incomplete proposal for a released board.
- For UART signalling, verify the idle state and behaviour during controller reset as well as the intended baud rate.
- For a command-and-status pair, define how the receiving controller distinguishes a valid signal from the isolator's default state.
- For a service connection, include power insertion and removal in qualification so an unpowered board cannot create an unexpected command.
Pricing and Lead Time
Request ISO7721DR with the required quantity, assembly location, demand date and carrier requirements. Ask each bidder to reproduce the complete ordering code in its response. A quotation that shortens the part to ISO7721 leaves unresolved which package and default-state variant will be delivered.
For traceability review, request the proposed lot information and the documents available for that lot. Define receiving checks before material arrives, including label agreement, package identity and any approved restrictions. Handling history should be assessed using the offered material's evidence; a manufacturer's generic quality page cannot describe every independent seller's storage conditions.
Commercial terms require a current written quote. Identify whether delivery estimates assume a confirmed allocation or further sourcing, and what the supplier means by the stated date. For a production repair programme, also document the size and duration of the expected demand. That lets purchasing compare a one-time repair lot with repeated smaller releases without inventing a universal market price or availability claim.
Common Alternatives
The closest-looking alternatives often differ in exactly the attributes that affect system behaviour. Another device may have both channels in the same direction, a different default state, another supply range or a wider package. Treat each difference as a review item rather than relying on a shared family prefix.
Use a comparison sheet that includes direction, input thresholds, output drive, propagation delay, pulse distortion, power sequencing and package-specific insulation data. When a new option changes a default logic state, test the effect on the receiving system during loss of power and startup. A change can alter a fault response even when normal data transmission works correctly.
For any manufacturer-listed newer option, obtain its own current documentation and assess the exact proposed suffix. A marketing comparison is useful for discovery, but the purchasing approval should refer to the board-specific evaluation. Keep approved options in the BOM system with a record of the revision they cover. Proposals awaiting review should remain visible as proposals so urgent replenishment does not silently bypass the design decision.
FAQ
Can ISO7721DR isolate an I2C bus directly?
Its channels have fixed digital directions. I2C uses open-drain bidirectional communication and needs an interface designed for those behaviours. Review a dedicated I2C isolation approach when the bus requirements include bidirectional data and clock stretching.
Why is the package important to the isolation rating?
TI specifies 3000 VRMS for the D package and different figures for wider package options. Procurement should use the rating and mechanical conditions belonging to the exact orderable rather than a family maximum.
What does the missing F suffix mean?
TI identifies the non-F variants with a default-high output behaviour under the conditions described in the data sheet. Confirm that this state is suitable for the receiving logic and its startup, shutdown and fault handling.
Request an RFQ review for ISO7721DR
Sources
- Texas Instruments ISO7721 product information (checked 2026-10-02)
- Texas Instruments ISO7721DR ordering and package information (checked 2026-10-02)