SENICO Electronics

Component sourcing and inventory guides

OPA828ID: Complete Sourcing Guide & Price 2026

Source OPA828ID for precision acquisition designs while distinguishing its SOIC package, JFET input behavior, multiplexer settling and package-specific limits.

Quick Answer

OPA828ID is a Texas Instruments precision JFET-input operational amplifier in an eight-pin SOIC. It is a candidate for analog acquisition circuits that need low input loading and substantial bandwidth, but selection still depends on the complete signal chain. Use the exact ID ordering code when evaluating specifications and obtaining quotations, because other OPA828 package variants do not share every published typical value.

For a multiplexed instrument, the purchasing discussion should follow an engineering decision about channel switching and settling. Establish the sensor impedance, input range, sampling sequence and allowable residual error. The useful question is whether the assembled channel reaches the required accuracy before conversion, not simply whether a catalog advertises a fast amplifier.

Key Specifications

The manufacturer identifies OPA828ID as package D, SOIC with eight pins, supplied in a 75-device tube. The ordering page lists operation from minus 40 to 125 degrees Celsius. Verify that your procurement drawing and assembly footprint refer to this package rather than another eight-pin enclosure.

TI distinguishes some D-package and DGN-package typical values. The very low bias-current headline associated with one package should not be copied into a specification for the other. Keep the package column, temperature and supply conditions alongside each extracted parameter, then use guaranteed limits where the design requires a guaranteed bound.

  • Signal envelope: the documented total supply range is 8 to 36 V. Confirm the allowable input common-mode range separately from the supply range.
  • Dynamic characteristics: the product information lists typical gain bandwidth of 45 MHz and slew rate of 150 V per microsecond; neither number alone defines precision acquisition settling.
  • Input and output: the device uses a JFET input and has rail-to-rail output behavior under specified conditions. Do not infer unrestricted input operation from the output description.
  • Packaging distinction: OPA828ID and OPA828IDR use the D package with different carrier formats, while the DGN ordering family uses a different package construction.

Where to Use This Part

Consider a system that sequentially measures sensors through an analog multiplexer. After a channel change, the amplifier, source network and converter input must settle together. Channel voltage differences, source impedance and filter charge all matter. TI describes input behavior intended to help multiplexed applications, but the complete channel still needs validation against its acquisition timing.

Test the demanding transition sequence instead of only repeating a small step on one channel. Record the multiplexer selection timing, amplifier output response and converter result under representative source impedances. Investigate whether an apparent accuracy problem originates in source loading, insufficient settling, reference behavior or the converter interface before changing the amplifier.

For high-impedance sources, board cleanliness, leakage paths and input protection become part of the error budget. Review the assembled board process and test fixture as well as the integrated circuit. A nominally small input bias current cannot remove leakage introduced elsewhere in the measurement path.

  • Multiplexed data acquisition: define the channel order, expected voltage steps and available acquisition interval, then validate the resulting error at the conversion instant.
  • Precision sensor front ends: assess source impedance and protection networks across the actual temperature range, including conditions that may create leakage or recovery errors.
  • Photodetector or transimpedance evaluation: review the feedback network and stability with the real detector capacitance before accepting a part based on input technology alone.

Pricing & Lead Time

A reliable quotation begins with OPA828ID written in full, followed by quantity, destination and preferred delivery schedule. State whether the material is for laboratory evaluation, a pilot build or released production. Those stages need different quantities and approval evidence; combining them into one urgent request can obscure the real requirement.

Ask for packaging and lot information appropriate to your assembly process. If the supplier proposes a reel-coded device, have manufacturing confirm feeder and handling requirements before changing the purchasing line. For a small engineering lot, specify what traceability information is required and which documentation should accompany the shipment.

This guide establishes no live selling price, allocation or shipment date. Compare written offers using the same quantity basis, currency, freight assumptions and acceptance requirements. Keep quotation validity and unresolved technical questions visible. The price decision should follow confirmation of the exact device and packaging rather than compensate for uncertainty about either.

Common Alternatives

OPA828IDR is a carrier-format discussion within the D-package ordering family. Check the current ordering information and manufacturing process before approving it for a specific purchase. A change to a DGN device requires a package and board review, even when the headline family name remains OPA828.

When considering a different amplifier family, compare the acquisition error budget rather than just bandwidth. Review input loading, noise, voltage range, overload recovery, settling and the downstream converter interface. Document the channel sequence used for evaluation so that an apparently successful single-channel demonstration is not mistaken for qualification of a multiplexed instrument.

FAQ

Why can an OPA828 family specification be wrong for OPA828ID?

Some typical specifications differ between package versions. Read the D-package entries and their measurement conditions for OPA828ID. Keep package identity attached to the parameter table, especially when comparing input bias or offset figures from abbreviated product listings.

Does the multiplexer-friendly input remove the need for settling tests?

No. Source resistance, switching charge, filtering and converter timing still determine system behavior. Evaluate representative channel transitions with the real source network and measure the error at the point where the converter actually acquires the signal.

What information improves an OPA828ID sourcing request?

Include the complete code, build quantities, destination, package preference and required documentation. Identify the project stage and any approved carrier alternatives. Keep engineering acceptance of a proposed device separate from confirmation of its commercial terms.

Send an OPA828ID RFQ for your acquisition-system build

Sources