Quick Answer
STM32F072C8T6 is an STMicroelectronics Arm Cortex-M0 microcontroller with 64 Kbytes of Flash, a processor running up to 48 MHz and a 48-pin LQFP package. It is a candidate for compact control products that need embedded firmware and wired interfaces. A useful purchase request identifies this complete ordering code, the approved hardware revision and the firmware image that production will load.
This guide focuses on preventing a plausible-looking MCU quotation from becoming a manufacturing mismatch. The number of pins alone does not establish equivalence, and a family headline advertising up to 128 Kbytes does not give this C8 device that larger memory. Confirm the precise variant against the design record. Current price, supply quantity and delivery dates need a written quotation; this article does not assign a fixed selling price.
- Exact option: 64 Kbytes of Flash in LQFP48 with tray packing.
- Match the approved pin allocation, firmware and programming settings to the offered code.
Key Specifications
ST's ordering page identifies the T6 product as LQFP48, with a nominal body of 7 by 7 mm and an operating temperature range of minus 40 to plus 85 degrees Celsius. Use that exact package drawing for the footprint review. The family datasheet covers several pin counts, memory sizes and temperature options, so its broadest values should not be copied indiscriminately into an approved-parts list.
- Memory planning: the C8 variant has 64 Kbytes of Flash; the STM32F072 family provides 16 Kbytes of SRAM. Check the linked firmware image and stack allocation before approving the order.
- Power domain: the documented operating supply is 2.0 to 3.6 V. Review every external interface against its particular pin limits instead of treating supply voltage as a universal input tolerance.
- Interfaces: the family includes USB full-speed device functionality and CAN. Map the required signals to the LQFP48 pin assignment and check conflicts with debug, oscillator and analog connections.
- Procurement identity: retain STM32F072C8T6 in the quotation and receiving record; record any carrier suffix separately and resolve discrepancies before production release.
Where to Use This Part
A practical application review starts with the product's interface requirements rather than a generic list of industries. For a USB-connected controller, specify the required USB role, endpoint behavior and update process. ST describes crystal-less USB device operation in this family, but the engineering team still needs to validate its selected clock configuration, firmware settings and board implementation under the intended conditions.
Prepare an acceptance checklist that connects purchasing to firmware and test. Identify the software revision, programming connector, reset behavior, debug access and a representative peripheral test. Keep a known-good assembly for comparison. Record the programming image checksum and option-byte configuration alongside the approved MCU to make later lot or board comparisons reproducible. These are suggested release controls, not claims that any particular customer system has already been qualified.
- USB peripheral controls: evaluate enumeration, reconnect behavior and application data transfer on the actual host systems the finished product must support.
- Industrial interface boards: check CAN transceiver compatibility, connector protection and the required communication test; the MCU's CAN peripheral is only one part of that interface.
- Sensor and actuator controllers: budget analog channels, timer assignments and firmware memory together, then confirm that their multiplexed pins remain available in this package.
Pricing and Lead Time
Send an RFQ with the exact manufacturer number, required quantity, delivery destination and manufacturing schedule. State whether the assembly process expects trays or tape and reel, whether mixed date codes are acceptable and which traceability documents are required. ST lists tray packaging for STM32F072C8T6 and a separate T6TR ordering option; the supplier should identify the actual carrier being offered.
Compare quotations on the same basis. Ask for unit price, currency, quotation validity, freight assumptions, taxes where applicable and the quantity assigned to each delivery. Separate a proposed dispatch date from arrival at your factory. If only part of the order can be scheduled, have the remaining quantity and its conditions written down rather than assuming one headline date covers everything.
For receiving inspection, match the packing label and device marking to the purchase order and maintain the lot link to production. Request clarification about relabeling or changed packaging before acceptance. These steps support a documented purchasing decision without treating a web listing as proof of a specific lot's condition.
Common Alternatives
First decide whether the problem is packaging, memory capacity or a change of MCU. The T6TR ordering option addresses a carrier difference; verify its complete ordering description and assembly requirements. A proposal to use an STM32F072xB memory variant is a hardware and firmware review item, even when the board package appears familiar. Document what changed and who approved it.
For a different MCU family, compare the pin assignment, supply domains, clock tree, peripheral availability, boot process and development tools. Rebuild and test the actual application rather than relying on a distributor's similarity table. Include recovery from interrupted programming in the test plan. A substitution that requires board routing or firmware changes belongs in a controlled engineering change, not an unnoticed purchasing-line edit.
FAQ
Does STM32F072C8T6 have 128 Kbytes of Flash?
No. ST identifies the C8 product with 64 Kbytes. The shared datasheet also covers larger-memory variants; verify the full ordering code when comparing quotations.
Can I omit the external USB crystal immediately?
The family supports crystal-less USB device operation, but the chosen clock setup and complete USB implementation still need engineering validation. Keep the approved schematic and firmware configuration together.
What should accompany my quotation request?
Provide the complete part number, quantity, carrier preference, delivery destination and any lot or documentation requirements. Ask for current commercial terms and keep the final quotation linked to the purchase order.
Request an STM32F072C8T6 quotation with your production requirements
Sources
- ST STM32F072C8T6 ordering details (checked 2026-10-02)
- ST STM32F072 family datasheet, DS9826 Rev 6 (checked 2026-10-02)