SENICO Electronics

Component sourcing and inventory guides

STM32F401CCU6: Complete Sourcing Guide & Price 2026

Evaluate STM32F401CCU6 sourcing through its UFQFPN48 package, 256 KB Flash, Cortex-M4 firmware needs, assembly controls and documented alternate review.

Quick Answer

STM32F401CCU6 is a Cortex-M4 microcontroller from STMicroelectronics with 256 Kbytes of Flash, 64 Kbytes of SRAM and a CPU frequency up to 84 MHz. This exact option uses a 48-pin UFQFPN package. It suits designs seeking a compact MCU with floating-point and signal-processing support, provided the board's pin assignment and firmware requirements fit.

A buyer should verify both the silicon capability and the assembly identity. The familiar STM32F401 name is not enough to distinguish memory capacity, package and temperature selection. Start from the released bill of materials, and request the complete CCU6 code in every response. A low-cost offer loses its meaning if accepting it requires an unplanned board or software change.

  • Requested package: UFQFPN48, with the manufacturer land pattern checked against the board.
  • Requested memory: 256 Kbytes of Flash and 64 Kbytes of SRAM, assessed against the real firmware image.

Key Specifications

ST's exact-part ordering page identifies a nominal 7 by 7 by 0.55 mm package and an ambient operating range of minus 40 to plus 85 degrees Celsius. Review the mechanical drawing for dimensions, terminal arrangement and assembly details. A 48-pin leaded footprint is not resolved by the same numerical pin count.

The Cortex-M4 core includes single-precision floating-point support. Whether an application benefits depends on compiler settings, libraries and the numerical work actually performed. Keep the build configuration alongside the memory report so a later code change does not accidentally alter resource requirements without a hardware review.

  • Processing: the family supports operation up to 84 MHz; clock configuration and Flash settings must follow the documented conditions.
  • Analog input: a 12-bit ADC is included, with available external inputs determined by the package pin map.
  • Connectivity: review the selected SPI, I2C, USART and USB functions against simultaneous-use requirements rather than adding every family headline together.

Where to Use This Part

Consider a compact acquisition controller that gathers data, performs filtering and sends results to a host. Estimate sample buffering first, including any second buffer used while the first is transmitted. Then inspect the linker output and worst-case stack demand. Flash capacity and RAM serve different purposes, and neither should be inferred from the other.

A board evaluation should also connect software timing to physical interfaces. Measure the longest processing interval while communications remain active, and exercise recovery when the host disconnects. For USB-related use, confirm clocking and firmware requirements from the device documentation. A successful enumeration test is only one event in the product's operating cycle.

The small leadless package makes assembly planning part of sourcing. Ask the manufacturing team to confirm stencil, placement and inspection arrangements for the approved footprint. Keep a record of the first production build's acceptance method so that a later packaging proposal can be reviewed against something more concrete than a product photograph.

  • Compact data loggers: evaluate buffer occupancy, storage transfers and recovery after a supply interruption.
  • Embedded control interfaces: check responsiveness while display, communication and control routines compete for processor time.
  • Signal-processing prototypes: validate numerical accuracy and execution time using the released compiler configuration and representative input data.

Pricing and Lead Time

Include STM32F401CCU6, the assembly revision and the build quantity in the RFQ. Explain whether the request covers bare devices, programmed devices or an engineering evaluation lot. The receiving team should be able to identify which deliverables were requested without reconstructing an informal conversation.

ST lists the base code with tray packing and also identifies a CCU6TR option. Ask the supplier to state the complete offered code and carrier. Where a line needs tape and reel, resolve that requirement before scheduling assembly rather than assuming a suffix will be changed automatically.

Request quotation validity, currency, source documentation and the date associated with each shipment quantity. Distinguish readiness for dispatch from arrival at the assembly site. If the order may be split across lots, record the split and retain the link between each lot and its production batch.

No price on this guide represents a current offer. The practical comparison is a dated quote with a precise part identity, an agreed package presentation and a clear delivery basis. These details also make a later commercial revision easier to evaluate without reopening settled engineering decisions.

Common Alternatives

A different STM32F401 memory option may be worth reviewing when the current image approaches a capacity limit, but family membership does not remove the need for verification. Check the complete package mapping, memory definition, device support files and programming configuration. Rebuild the application and run its actual acceptance tests.

Changing from UFQFPN to a leaded package is a board decision. Even when firmware resources appear similar, the physical routing, assembly process and inspection criteria change. Have engineering approve the new schematic and land pattern before purchasing a production quantity.

For another MCU family, capture migration work explicitly: startup code, interrupts, clocks, peripheral drivers, bootloader and debug tools. Compare the finished development cost and schedule with the procurement benefit. Evaluation material should retain its proposed-part identity until the approved bill of materials is formally updated.

FAQ

Is STM32F401CCU6 an LQFP48 device?

No. ST identifies CCU6 as UFQFPN48. Verify the package drawing and approved board footprint instead of treating all 48-pin packages as mechanically equivalent.

Does an 84 MHz rating establish application throughput?

No. Throughput depends on instruction mix, memory access, interrupts and peripherals. Measure the released application under its busiest operating conditions before assigning a performance margin.

Can a supplier send a different memory density under the family name?

The requested code should remain explicit. Any different full code requires a documented engineering assessment and purchasing acceptance before it becomes production material.

Request a quotation for STM32F401CCU6 with your build requirements

Sources