Quick Answer
STM32F469AEH6 is an STMicroelectronics Cortex-M4 microcontroller with 512 KB of internal Flash in a 169-ball UFBGA package. It belongs to a graphics-oriented MCU family, but the exact memory code and package must remain visible throughout the purchasing process. A supplier description that says only STM32F469 leaves important engineering decisions unresolved.
For a display controller or compact industrial interface, start by checking the approved board drawing and firmware memory report. The commercial request should follow those requirements, including the complete ordering code, requested quantity and acceptable packing. This guide explains the checks needed before an offer can be reviewed; it does not establish a current selling price, available quantity or dispatch date.
Key Specifications
The manufacturer product page identifies the AE memory variant separately from the larger Flash options in the same family. Keep that distinction when comparing catalogue descriptions. ST also lists the complete AEH6 ordering code and package, while the datasheet supplies the detailed ball assignments and electrical conditions needed for board approval.
Record the datasheet revision alongside the purchase specification. A distributor spreadsheet can be useful for finding an offer, but it should not replace the package drawing or device-specific memory selection. Ask engineering to resolve any mismatch before procurement combines quantities from different descriptions.
- Processor and memory: Cortex-M4 with floating-point and DSP capabilities, operating at up to 180 MHz. This AE device has 512 KB of Flash; the family maximum must not be substituted for that capacity.
- Package: UFBGA169, identified by ST as a 7 by 7 mm body with 0.5 mm ball pitch. Confirm the exact land pattern, ball map and assembly orientation against the controlled drawing.
- Ordering conditions: ST lists AEH6 with tray packing and an operating temperature range of minus 40 to plus 85 degrees Celsius. Preserve the complete suffix when comparing an offered lot.
- Graphics resources: the family includes Chrom-ART acceleration and display interfaces. Check the peripheral and ball-assignment tables for this package before assuming that every family-level interface is usable on the board.
Where to Use This Part
A useful application review begins with the display workload. List resolution, colour depth, buffering strategy, refresh target and the background tasks that must continue while the screen changes. These inputs determine memory traffic and firmware size. A processor clock figure alone cannot establish whether the complete user interface will meet its response-time requirement.
Calculate display storage separately from executable code. For example, an illustrative 480 by 272 image at two bytes per pixel needs 261,120 bytes for one frame before alignment or additional buffers. That is a planning calculation, not a claim about this device's available framebuffer allocation. The memory map and concurrent peripheral accesses still require engineering review.
The BGA package also creates manufacturing questions. Ask the assembler to confirm the inspection method, stencil and rework process for the approved board. Document moisture handling and the condition of offered packing before a lot reaches the line. An electrical match does not eliminate assembly risk.
- Industrial operator panels: assess graphics updates together with control-loop timing, communication interrupts and recovery after a supply interruption.
- Compact instruments: review how display activity interacts with acquisition buffers, external memory and the application's calibration or configuration storage.
Pricing & Lead Time
Request a dated quotation for STM32F469AEH6 with the exact build quantity, delivery destination and required receipt date. Include whether partial deliveries are acceptable and whether the production line requires original trays. Ask the offer to identify manufacturer, lot information, packing condition, quantity basis, currency and quotation expiry.
Compare commercial replies only after the ordering identity matches. An offer for a different Flash density or package can change programming, inspection and board qualification costs. Keep those engineering costs separate from the unit-price comparison, and do not count unapproved alternatives toward the committed production requirement.
For a continuing build, provide a phased demand schedule rather than an unexplained annual total. Ask what supports the proposed delivery dates and which milestones remain conditional. Confirm stock, price and delivery timing through the quotation before placing an order.
Common Alternatives
ST lists STM32F469AEH7 and STM32F469AEH7TR alongside AEH6 in the same UFBGA169 package family. Treat these as specific options to investigate, not as automatically approved replacements. The temperature-grade suffix and packing form belong in the comparison even when the product name and package appear similar.
If the reason for a change is firmware growth, start a separate memory-capacity review. If it is assembly access, investigate a package change as a board redesign. Combining these two decisions into a generic equivalent-part request makes it difficult to identify which requirement an offer actually meets.
Preserve the original code on the RFQ and put each proposed alternative on its own line. Engineering should compare ball assignments, power connections, boot configuration, memory layout and the tested firmware image before procurement authorizes a change.
FAQ
Does STM32F469AEH6 contain the family maximum of 2 MB Flash?
No. The AE variant is identified with 512 KB of Flash. Confirm that the released firmware, required update space and any stored assets fit the selected memory arrangement before accepting the order code.
Is the 169-ball package enough to identify an acceptable substitute?
No. Ball count does not establish ball assignments, electrical behaviour or firmware suitability. Compare the exact package drawing and device documentation, then retain the engineering approval with the purchasing record.
What should accompany a quotation request for an existing display board?
Provide the full part number, quantity, required receipt date, approved packing and any lot restrictions. Add the board revision and an explicit alternate policy so suppliers do not silently replace the requested device.
Request an STM32F469AEH6 quotation with quantity, board requirements and delivery details
Sources
- STMicroelectronics STM32F469AE product and ordering information (checked 2026-10-10)
- ST online store: STM32F469AEH6 ordering details (checked 2026-10-10)
- ST STM32F469xx datasheet, DS11189 revision 8 (checked 2026-10-06)