SENICO Electronics

Component sourcing and inventory guides

STM32G071RBT6: Complete Sourcing Guide & Price 2026

Source STM32G071RBT6 with verified memory, LQFP64 identity and practical checks for peripheral mapping, USB Type-C control, firmware and purchasing terms.

Quick Answer

STM32G071RBT6 is STMicroelectronics' 64-pin LQFP microcontroller combining a Cortex-M0+ core, 128 Kbytes of Flash and 36 Kbytes of SRAM. Its maximum CPU frequency is 64 MHz. It is a useful candidate for compact controllers with several serial interfaces, but purchasing approval should follow the exact peripheral and pin allocation of the intended board.

The RBT6 suffix matters because a family-level search can return different memory densities, packages and temperature grades. Begin the sourcing discussion with the complete manufacturer number and the hardware revision that uses it. This guide connects those identifiers to a release checklist; a current commercial quotation must separately establish quantities, price, packaging and the proposed delivery schedule.

  • Confirm LQFP64 and the complete RBT6 identity before comparing offers.
  • Allocate required peripherals to actual package pins before committing the production bill of materials.

Key Specifications

ST lists the requested ordering option in a 10 by 10 mm LQFP64 body, with tray packing and an ambient operating range from minus 40 to plus 85 degrees Celsius. The family datasheet includes other temperature options. Do not apply the widest family temperature headline to this specific orderable device.

Build a short requirements matrix before final selection. Each interface should have an owner, a pin assignment and a startup state. Reserve programming access and any required oscillator connections early. An apparently unused pin can become unavailable once alternate functions are allocated, so a count of total pins alone is a weak purchasing specification.

  • Memory: this RB option provides 128 Kbytes of Flash; compare the released image, bootloader and future update allowance with that capacity.
  • Supply: the documented operating range is 1.7 to 3.6 V; evaluate the board rails and external signal levels separately.
  • Interfaces: the family includes USART, SPI, I2C and a USB Type-C Power Delivery controller; confirm the needed signals in the LQFP64 pin table.

Where to Use This Part

A multiport appliance controller is a concrete selection case. List which links operate concurrently, their rates and the worst burst of incoming data. Then review interrupt latency, buffering and memory use with the actual firmware. A development board demonstration with one interface active does not establish behavior when every production connection is busy.

For a USB Type-C design, make a separate power-path diagram showing the connector, protection, switching devices and policy firmware. The presence of a Power Delivery controller is not evidence that the MCU provides every function of a finished USB product. Have engineering identify which blocks are implemented inside the MCU and which remain elsewhere in the design.

At prototype acceptance, exercise loss of supply, reset during communication and interrupted programming. Record the firmware checksum and option-byte settings with the board revision. This suggested test record helps distinguish a component issue from an application configuration issue when comparing later manufacturing lots.

  • Appliance user controls: validate switch inputs, display updates and communications under realistic simultaneous activity.
  • Industrial interface adapters: verify the chosen transceivers, signal protection and startup behavior around each MCU serial port.
  • Power-control supervision: test the complete policy and external power path before treating a working command sequence as a released design.

Pricing and Lead Time

Request STM32G071RBT6 by its full number, with quantities divided into prototype, pilot and production requirements. State whether the assembly line accepts trays and identify any approved carrier alternative explicitly. If programming before assembly is required, describe that as a separate service with a controlled image and acceptance method.

Ask for a written response covering currency, quantity basis, quotation validity, packaging condition and delivery destination. Require any date-code restriction or lot-splitting condition to be acknowledged. The manufacturer page establishes the ordering identity; it is not a commercial commitment by another supplier for your schedule.

On receipt, reconcile the purchase order, outer label and lot record before the material reaches programming. Keep any discrepancy in a review queue. For programmed material, preserve the association between the supplied lot, firmware revision and programming result. This prevents later investigation from relying on a generic description such as STM32G0 controller.

Common Alternatives

The right comparison depends on why a change is being proposed. A carrier-only request needs an assembly review. A different Flash density needs a memory-map and firmware review. A different G0 device requires confirmation of the peripheral set and pin functions, even when the package outline appears familiar.

Create an alternate evaluation sheet with the original part, proposed complete code and every changed requirement. Include clock configuration, boot behavior, power modes, analog resources and production programming support. Assign an engineering approver before the purchasing team treats the proposal as usable.

For a redesign, compare total project effort rather than just the quoted semiconductor cost. Firmware migration, board routing, fixtures and renewed system testing can dominate a small unit-price difference. Keep evaluation samples separate from approved production material until the revised design record identifies the accepted device.

FAQ

Does the USB Type-C controller mean the MCU has every USB function?

No. Match the required data and power roles to the peripheral documentation and the external circuitry. Type-C power negotiation and a complete USB data implementation are distinct design questions.

Does STM32G071RBT6 include 128 Kbytes of Flash?

Yes. The RB ordering option identifies that capacity. Preserve the exact code when requesting offers so that a lower-density family member is not silently substituted.

Which firmware information should accompany a production order?

State the approved image revision, whether programming is required, the option-byte policy and the verification method. Keep confidential firmware transfer details in the controlled manufacturing process.

Request a quotation for STM32G071RBT6 with your build requirements

Sources