Quick Answer
STM32L476RGT6 is an STMicroelectronics Cortex-M4 microcontroller with 1 Mbyte of Flash and 128 Kbytes of SRAM in an LQFP64 package. The core operates up to 80 MHz and includes floating-point support. It is a candidate for products that combine substantial embedded firmware with carefully managed active and low-power operation.
The central sourcing question is whether the exact RGT6 device supports the released board and energy budget. A low-power family label cannot establish battery life for a complete product. Pair the component selection with measured operating states, then obtain a dated quotation for the precise ordering option and packaging required by production.
- Use the complete RGT6 orderable identity when matching quotations to the approved bill of materials.
- Evaluate energy over a full operating cycle, including wakeup, processing, communication and return to sleep.
Key Specifications
ST lists STM32L476RGT6 with a 1.71 to 3.6 V supply range, tray packing and an ambient operating range from minus 40 to plus 85 degrees Celsius. The LQFP64 body is nominally 10 by 10 mm. Those details should appear in the component approval record alongside the controlled footprint and assembly drawing.
The family datasheet describes several package sizes and peripheral combinations. In particular, an interface mentioned in a family overview may require pins that are not available on a smaller package. Build the project requirement from the LQFP64 pin table rather than assuming the largest family configuration applies.
- Memory: the RG option provides 1 Mbyte of Flash; reserve space deliberately for application, update strategy and any retained configuration.
- Processing: Cortex-M4 with single-precision FPU up to 80 MHz supports numerical tasks when the software build enables the intended features.
- System integration: review timers, analog resources, communication pins and low-power wakeup sources as a combined design.
Where to Use This Part
A battery-operated data logger illustrates why procurement and firmware need a shared definition of success. List each operating state and its duration, then measure current at the product input. Include external sensors, pull-ups, regulators and indicators. A microcontroller-only measurement can miss the dominant load in the finished assembly.
Choose wakeup tests around real events. The logger might respond to a timer, a user input or communication from another device. Verify that the required clock and peripheral state is restored before accepting the first measurement. Keep both ordinary wakeups and recovery from a depleted supply in the evaluation plan.
For firmware updates, define the memory layout and recovery path before selecting quantities. Large Flash capacity can support a flexible software plan, but a workable update system still depends on application design. Test an interrupted update with the released protection settings and programming tools, and retain the resulting procedure with the product revision.
- Remote measurement products: assess total cycle energy, sensor warmup and the time needed to transmit a valid result.
- Portable operator interfaces: measure the effect of display updates and user activity on both responsiveness and battery use.
- Embedded instruments: validate numerical processing and storage requirements alongside analog measurement quality.
Pricing and Lead Time
The RFQ should identify STM32L476RGT6, required quantities by build stage and the delivery site. Specify whether tray supply is acceptable and whether programming is part of the requested service. Include any permitted lot mixing, date-code limits or documentation requirements as explicit conditions.
For a programmed-device offer, separate semiconductor pricing from programming and verification. Define how the supplier receives the approved image and how failed programming results are reported. The final acceptance record should make it possible to trace the firmware version to the received material without exposing proprietary code in public purchasing correspondence.
Ask each supplier to give a dated quote, currency, validity period and a schedule tied to quantities. Treat manufacturer lifecycle or catalog information as product evidence, while treating the written offer as the evidence for commercial terms. A web page alone does not allocate material to the intended build.
At receipt, inspect identity and packaging before committing material to assembly. Record the lot and any programmed status. If an offer changes late in the cycle, have the supplier identify the changed field so purchasing can route only the affected question to engineering or manufacturing.
Common Alternatives
There are several distinct reasons to consider an alternative: a different carrier, a memory change, a temperature requirement or a broader MCU redesign. Name the reason first. A proposal that solves only packaging should not become an unexamined change to silicon capability.
For another L4 device, compare its actual pins, memory organization, peripheral instances and wakeup behavior. Recheck the firmware package and compiler target. Review errata for the selected device and revision as part of normal engineering release; sharing a Cortex-M4 core does not guarantee identical peripheral behavior.
When comparing a different low-power family, use the product's measured duty cycle as the benchmark. The fastest active state or lowest isolated sleep figure may not minimize energy over the real workload. Include software migration, new fixtures and verification effort in the purchasing decision, and release the alternate only after those responsibilities have owners.
FAQ
Does STM32L476RGT6 have 1 Mbyte of Flash?
Yes. ST identifies the RG option with that Flash capacity. Confirm the complete ordering number when evaluating offers, since the family includes other memory selections.
Can the low-power label predict battery life?
No. Measure complete product states and their durations, including external circuitry. Use those measurements to calculate the energy budget and validate representative operating cycles.
Are all family peripherals available in LQFP64?
Use the package-specific pin and feature tables. Larger family packages can expose functions that are unavailable or impractical in a particular 64-pin board allocation.
Request a quotation for STM32L476RGT6 with your build requirements
Sources
- ST STM32L476RGT6 ordering details (checked 2026-10-02)
- ST STM32L476xx datasheet (checked 2026-10-02)