SENICO Electronics

Component sourcing and inventory guides

TPS7A2033PDBVR: Complete Sourcing Guide & Price 2026

Review TPS7A2033PDBVR as a 3.3 V SOT-23 LDO, including input headroom, noise and PSRR conditions, thermal dissipation, output capacitor and RFQ identity.

Quick Answer

TPS7A2033PDBVR is the 3.3 V output option of TI's TPS7A20 low-dropout regulator family, supplied in a five-pin SOT-23 package. The family is rated for 300 mA and targets low-noise analog and RF power rails. Its value in a design depends on input headroom, thermal dissipation and the noise requirements of the actual load.

Procurement should preserve the entire 33PDBVR suffix, because the family includes different output voltages and packages. An offer containing only TPS7A20 leaves critical details unresolved. Establish the accepted output rail and footprint first, then compare a written quote with the production quantity and carrier requirements.

  • Requested output: fixed 3.3 V, with the complete orderable code retained in the bill of materials.
  • Requested package: DBV SOT-23 with five pins and tape-and-reel presentation.

Key Specifications

TI lists a family input range of 1.6 to 6.0 V. That range does not imply that the 3.3 V option can maintain its output when its input is below the required headroom. Determine the minimum input at the regulator pins after upstream tolerance, wiring drop and transient behavior have been considered.

The manufacturer's headline noise and rejection figures have defined test conditions. Carry those conditions into the design review instead of combining attractive numbers from different operating points. For a sensitive analog rail, specify the frequency band, load pattern and maximum permitted disturbance at the load. The P in the orderable code denotes active output discharge; check that shutdown behavior against the connected load.

  • Output capability: the family supports 300 mA, subject to dissipation and operating limits; estimate the voltage-drop loss for the intended load.
  • Capacitor: TI specifies stability with at least 1 microfarad of ceramic output capacitance; review effective capacitance under bias and temperature.
  • Package-specific dropout: TI lists 145 mV maximum at 300 mA and 3.3 V output for DBV under the stated datasheet conditions.

Where to Use This Part

A regulator following a switching converter is a common candidate use. Measure the upstream ripple spectrum and identify which portions matter to the sensor or receiver. Power-supply rejection varies with frequency and operating conditions, so a strong low-frequency figure does not alone prove sufficient rejection at a switching harmonic.

Thermal arithmetic is equally important. The linear regulator dissipates energy associated with the input-to-output voltage difference and load current. Evaluate the highest input at the largest sustained load, then test the assembled board in its enclosure. A satisfactory room-temperature open-board result may not represent the worst product condition.

Examine the rail during enable, disable and changes in load. The connected circuit may draw a startup pulse different from its steady consumption, or may be powered through another signal path. Describe those states in the design record and check them against the regulator documentation before accepting the complete power architecture.

  • Precision sensor supplies: measure the downstream signal quality while the upstream converter and digital system are active.
  • Compact RF sections: establish allowed rail disturbance across the relevant frequency band and receiver operating states.
  • Portable control electronics: include standby current and regulator enable sequencing in the full product energy budget.

Pricing and Lead Time

Give the supplier TPS7A2033PDBVR exactly, with the required quantity and build schedule. The DBV ordering record identifies five-pin SOT-23 and a large tape-and-reel carrier. Specify whether a complete reel is necessary for production or whether another presentation can be reviewed by the assembly team.

Ask for the offered manufacturer's full code, packaging condition, lot information and supporting documentation. A different fixed-output voltage should be treated as a separate product proposal, even if the commercial description calls both items low-noise LDOs. Have receiving staff compare the actual label to the approved purchasing identity.

Request price, currency, quote validity and delivery terms in the same written response. If evaluation and production orders differ in packaging, show each basis explicitly. A useful quotation lets the buyer understand which quantity and presentation a price covers without relying on assumptions about a family listing.

Where an offer involves mixed lots, record the proposed split and decide whether the production traceability process can handle it. Retain the accepted conditions with the purchase order. No current stock, fixed dispatch promise or tested-lot claim is established by this guide; those matters require evidence associated with the specific offer.

Common Alternatives

The first alternate question is whether the proposed code preserves the required output voltage. Next compare package, enable behavior, dropout conditions, capacitor requirements and thermal performance. A regulator with a higher nominal current rating can still be unsuitable if its noise or input limits differ from the rail specification.

Other TPS7A20 packages are not automatic footprint substitutes for DBV. Ask for the complete mechanical drawing and identify any board, stencil or inspection changes. Also check the exact ordering option's behavior rather than inferring every feature from a shared family name.

For another LDO family, validate the power rail as a system. Measure output disturbance during real load changes and verify the analog or RF function that motivated the low-noise regulator. Include qualification effort, passive changes and assembly work when assessing the procurement benefit. Approve the replacement through a controlled component and board revision.

FAQ

Can the 3.3 V version regulate from any input within the family range?

No. Regulation requires sufficient input voltage above the output at the intended load and temperature. Check dropout and the minimum voltage actually reaching the regulator.

Is the headline PSRR value valid at every frequency?

No. Review the rejection curves and their operating conditions. Compare them with the measured upstream ripple and the downstream circuit requirements.

What should identify this LDO on an RFQ?

Use TPS7A2033PDBVR, quantity, carrier needs and destination. State that changes to output voltage, package or ordering suffix require an explicit proposal and approval.

Request a quotation for TPS7A2033PDBVR with your build requirements

Sources