Hirose Electric Co Ltd GT11X-2/2P-DS(70)
CONN HEADER R/A 2POS
Answer first: this page is a purchasing reference for the exact part number GT11X-2/2P-DS(70) from Hirose Electric Co Ltd. Use it to start datasheet, package, manufacturer and RFQ verification; do not treat page text as a live stock, price or lead-time promise.
Key Parameters
| Part Number | GT11X-2/2P-DS(70) |
|---|---|
| Manufacturer | Hirose Electric Co Ltd |
| Category | Headers, Male Pins |
| series | GT11 |
| packaging | Bulk |
| product status | Obsolete |
| param 1 | Header |
| param 2 | Male Pin |
| param 3 | - |
| param 4 | 2, 2 |
| param 5 | 1 |
| param 6 | - |
| param 7 | All |
| param 8 | Board to Cable/Wire |
| param 9 | Shrouded - 4 Wall |
| param 10 | Through Hole, Right Angle |
| param 11 | Solder |
| param 12 | Latch Holder |
| param 13 | - |
| param 14 | 0.118" (3.00mm) |
| param 15 | - |
| param 16 | 0.559" (14.20mm) |
| param 17 | Square |
| param 18 | Tin |
| param 19 | - |
| param 20 | Tin |
| param 21 | Brass |
| param 22 | Polybutylene Terephthalate (PBT) |
| param 23 | Mounting Flange |
| param 24 | - |
| param 25 | - |
| param 26 | - |
| param 27 | Gray |
| param 28 | - |
| param 29 | - |
Parameters are provided for purchasing review. Confirm package, suffix, lifecycle status, datasheet revision and approved substitutes before ordering.
How to Verify GT11X-2/2P-DS(70) Before Ordering
Datasheet and parameter checks
- Confirm the full manufacturer part number, not only a shortened search keyword.
- Compare package, pinout, dimensions, voltage or rating fields, temperature range and compliance wording against the released BOM.
- Use the manufacturer datasheet or drawing for electrical and mechanical limits before approving a substitute.
RFQ fields SENICO needs
- Send exact part number, manufacturer, quantity, target delivery date, destination and required packaging.
- State whether alternates are allowed, and list any date-code, certificate, traceability or customer AVL requirement.
- Keep exact stock, factory lead time and proposed alternatives in separate quote lanes.
For GT11X-2/2P-DS(70), SENICO recommends checking manufacturer marking, package, date code, requested quantity, approved vendor requirements and replacement risk before issuing a purchase order. If a supplier suggests an equivalent, record the changed fields and approval owner before comparing price.
We do not treat displayed data as a real-time stock or price commitment. The RFQ reply is the verified commercial reference.
Related buying guides: stock and lead-time verification, equivalent IC comparison, and BOM RFQ preparation.