Hirose Electric Co Ltd GT32-19DP-0.75DSA
CONN PIN HEADER PCB T/H STR
Answer first: this page is a purchasing reference for the exact part number GT32-19DP-0.75DSA from Hirose Electric Co Ltd. Use it to start datasheet, package, manufacturer and RFQ verification; do not treat page text as a live stock, price or lead-time promise.
Key Parameters
| Part Number | GT32-19DP-0.75DSA |
|---|---|
| Manufacturer | Hirose Electric Co Ltd |
| Category | Headers, Male Pins |
| series | GT32 |
| packaging | Bulk |
| product status | Active |
| param 1 | Header |
| param 2 | Male Pin |
| param 3 | 0.059" (1.50mm) |
| param 4 | 19 |
| param 5 | 2 |
| param 6 | 0.073" (1.85mm) |
| param 7 | 19 |
| param 8 | Board to Cable/Wire |
| param 9 | Shrouded - 4 Wall |
| param 10 | Through Hole |
| param 11 | Solder |
| param 12 | Push-Pull |
| param 13 | - |
| param 14 | - |
| param 15 | - |
| param 16 | 0.545" (13.84mm) |
| param 17 | Square |
| param 18 | - |
| param 19 | - |
| param 20 | - |
| param 21 | - |
| param 22 | Polyamide (PA), Nylon |
| param 23 | - |
| param 24 | - |
| param 25 | - |
| param 26 | - |
| param 27 | - |
| param 28 | - |
| param 29 | - |
Parameters are provided for purchasing review. Confirm package, suffix, lifecycle status, datasheet revision and approved substitutes before ordering.
How to Verify GT32-19DP-0.75DSA Before Ordering
Datasheet and parameter checks
- Confirm the full manufacturer part number, not only a shortened search keyword.
- Compare package, pinout, dimensions, voltage or rating fields, temperature range and compliance wording against the released BOM.
- Use the manufacturer datasheet or drawing for electrical and mechanical limits before approving a substitute.
RFQ fields SENICO needs
- Send exact part number, manufacturer, quantity, target delivery date, destination and required packaging.
- State whether alternates are allowed, and list any date-code, certificate, traceability or customer AVL requirement.
- Keep exact stock, factory lead time and proposed alternatives in separate quote lanes.
For GT32-19DP-0.75DSA, SENICO recommends checking manufacturer marking, package, date code, requested quantity, approved vendor requirements and replacement risk before issuing a purchase order. If a supplier suggests an equivalent, record the changed fields and approval owner before comparing price.
We do not treat displayed data as a real-time stock or price commitment. The RFQ reply is the verified commercial reference.
Related buying guides: stock and lead-time verification, equivalent IC comparison, and BOM RFQ preparation.