Home / Products / Headers, Male Pins / TE Connectivity Aerospace, Defense and Marine / 530785-9

TE Connectivity Aerospace, Defense and Marine 530785-9

CONN HEADER BRD EDGE 80P 1.91MM

Answer first: this page is a purchasing reference for the exact part number 530785-9 from TE Connectivity Aerospace, Defense and Marine. Use it to start datasheet, package, manufacturer and RFQ verification; do not treat page text as a live stock, price or lead-time promise.

Manufacturer: TE Connectivity Aerospace, Defense and Marine Category: Headers, Male Pins Part number: 530785-9 Package: RFQ verification required

Key Parameters

Part Number530785-9
ManufacturerTE Connectivity Aerospace, Defense and Marine
CategoryHeaders, Male Pins
seriesBox
packagingBulk
product statusActive
param 1Header
param 2Male Pin
param 30.075" (1.91mm)
param 480
param 52
param 60.125" (3.18mm)
param 7All
param 8Board to Board or Cable
param 9Shrouded - 4 Wall
param 10Board Edge, Straddle Mount
param 11Solder
param 12Push-Pull
param 130.181" (4.60mm)
param 14-
param 15-
param 16-
param 17Square
param 18Gold
param 1950.0µin (1.27µm)
param 20-
param 21Brass
param 22Diallyl Phthalate (DAP)
param 23Card Extender, Mating Guide
param 24-
param 25-
param 26-
param 27Blue
param 28-
param 29-

Parameters are provided for purchasing review. Confirm package, suffix, lifecycle status, datasheet revision and approved substitutes before ordering.

How to Verify 530785-9 Before Ordering

Datasheet and parameter checks

  • Confirm the full manufacturer part number, not only a shortened search keyword.
  • Compare package, pinout, dimensions, voltage or rating fields, temperature range and compliance wording against the released BOM.
  • Use the manufacturer datasheet or drawing for electrical and mechanical limits before approving a substitute.

RFQ fields SENICO needs

  • Send exact part number, manufacturer, quantity, target delivery date, destination and required packaging.
  • State whether alternates are allowed, and list any date-code, certificate, traceability or customer AVL requirement.
  • Keep exact stock, factory lead time and proposed alternatives in separate quote lanes.

For 530785-9, SENICO recommends checking manufacturer marking, package, date code, requested quantity, approved vendor requirements and replacement risk before issuing a purchase order. If a supplier suggests an equivalent, record the changed fields and approval owner before comparing price.

We do not treat displayed data as a real-time stock or price commitment. The RFQ reply is the verified commercial reference.

Related buying guides: stock and lead-time verification, equivalent IC comparison, and BOM RFQ preparation.